Example 11.9 Sadiku: A series-connected load draws a current i(t) = 4 cos(100 πt + 10°) A when the applied voltage is v(t) = 120 cos(100πt - 20°) V. Find the apparent power and the power factor of the load. Determine the element values that form the series-connected load.

Eastern Refinery Limited (ERL) - Probationary Engineer (Electrical) - (30-12-2022) ইলেকট্রিক্যাল এন্ড ইলেকট্রনিক্স ইঞ্জিনিয়ারিং (EEE)

Created: 7 months ago | Updated: 7 months ago

Updated: 7 months ago

Ans :

আপারেন্ট পাওয়ার,

$S = V_{r m s} I_{r m s}$ = $\frac{120}{\sqrt{2}} \frac{4}{\sqrt{2}}$ = 240 VA

পাওয়ার ফ্যাক্টর হবে, pf = $c o s (θ_{v} - θ_{i})$

= $\cos (- 20^{°} - 10^{°})$ = 0.866 (leading)

$z = \frac{V}{I}$

= $30 ∠ - 30 ° = 25.98 - j 15 Ω$

$p f = \cos (- 30^{°}) = 0.866$ (leading)

$X_{C} = - 15 = - \frac{1}{ω C}$

$C = \frac{1}{15 ω}$ = $\frac{1}{15 \times 100 π}$ = 212.2 μF

7 months ago

0 0

MORE ANS Please wait...

0 163

Question:
Example 11.9 Sadiku: A series-connected load draws a current i(t) = 4 cos(100 πt + 10°) A when the applied voltage is v(t) = 120 cos(100πt - 20°) V. Find the apparent power and the power factor of the load. Determine the element values that form the series-connected load.

Earn by adding a description for the above question! 🏆✨ Provide correct answer/description to Question, help learners, and get rewarded for your contributions! 💡💰'

Description

ইলেকট্রিক্যাল এন্ড ইলেকট্রনিক্স ইঞ্জিনিয়ারিং (EEE)

**'Provide valuable content and get rewarded! 🏆✨**
Contribute high-quality content, help learners grow, and earn for your efforts! 💡💰'

Content

1
Find currents I and I₁ in the following circuit.

Created: 2 years ago | Updated: 8 months ago

Updated: 8 months ago

No answer found.
Answer the Question and earn rewards! 🏆✨ <br> Provide correct answer to Question, help learners, and get rewarded for your contributions! 💡💰'

Ans

৪৫ তম বিসিএস লিখিত ইলেকট্রিক্যাল এন্ড ইলেকট্রনিক্স ইঞ্জিনিয়ারিং (EEE)

2 608

2
Determine the Thevenin's equivalent circuit at terminal X-Y of the following circuit.

Created: 2 years ago | Updated: 8 months ago

Updated: 8 months ago

No answer found.
Answer the Question and earn rewards! 🏆✨ <br> Provide correct answer to Question, help learners, and get rewarded for your contributions! 💡💰'

Ans

৪৫ তম বিসিএস লিখিত ইলেকট্রিক্যাল এন্ড ইলেকট্রনিক্স ইঞ্জিনিয়ারিং (EEE)

1 603

3 State maximum power transfer theorem.

Created: 2 years ago | Updated: 8 months ago

Updated: 8 months ago

Maximum Power Transfer Theorem :

In electrical engineering, the maximum power transfer theorem states that, to obtain maximum external power from a power source with internal resistance, the resistance of the load must equal the resistance of the source as viewed from its output terminals.

৪৫ তম বিসিএস লিখিত ইলেকট্রিক্যাল এন্ড ইলেকট্রনিক্স ইঞ্জিনিয়ারিং (EEE)

More Please Wait

1 592

4
If the switch in the following circuit opens at t = 0, find v(t) for t≥ 0 and the initial energy stored in the capacitor.

Created: 2 years ago | Updated: 8 months ago

Updated: 8 months ago

For t<0, the switch is closed.

Capacitor acts as open to DC.

Voltage across the capacitor,

v(0^-)= {(12||4)×V}÷{(12||4)+6} = 8VFor t=0, the switch is opened,Voltage across the Capacitor cannot change instantaneously,So, v(0^-)= v(0) = 8VAt t>0, The capacitor is discharging.R_th= (12||4) = 3 ohmC= 1/6 FTime constant, Π = R_th×C = 0.5 So, v(t) = v(0)e^-t/Π = 8e^-t/0.5=8e^-2tV (Ans.)

৪৫ তম বিসিএস লিখিত ইলেকট্রিক্যাল এন্ড ইলেকট্রনিক্স ইঞ্জিনিয়ারিং (EEE)

More Please Wait

1 601

5
Show that a series RL circuit is a low pass filter if the output is taken across the resistor. Calculate the cut-off frequency (f_c) if L = 2 mH and R = 10 kΩ.

Created: 2 years ago | Updated: 8 months ago

Updated: 8 months ago

No answer found.
Answer the Question and earn rewards! 🏆✨ <br> Provide correct answer to Question, help learners, and get rewarded for your contributions! 💡💰'

Ans

৪৫ তম বিসিএস লিখিত ইলেকট্রিক্যাল এন্ড ইলেকট্রনিক্স ইঞ্জিনিয়ারিং (EEE)

1 690

6
Compute the average and effective values of the square voltage wave shown in the following figure.

Created: 2 years ago | Updated: 8 months ago

Updated: 8 months ago

No answer found.
Answer the Question and earn rewards! 🏆✨ <br> Provide correct answer to Question, help learners, and get rewarded for your contributions! 💡💰'

Ans

৪৫ তম বিসিএস লিখিত ইলেকট্রিক্যাল এন্ড ইলেকট্রনিক্স ইঞ্জিনিয়ারিং (EEE)

1 655

Example 11.9 Sadiku: A series-connected load draws a current i(t) = 4 cos(100 πt + 10°) A when the applied voltage is v(t) = 120 cos(100πt - 20°) V. Find the apparent power and the power factor of the load. Determine the element values that form the series-connected load.

Question:
Example 11.9 Sadiku: A series-connected load draws a current i(t) = 4 cos(100 πt + 10°) A when the applied voltage is v(t) = 120 cos(100πt - 20°) V. Find the apparent power and the power factor of the load. Determine the element values that form the series-connected load.

ইলেকট্রিক্যাল এন্ড ইলেকট্রনিক্স ইঞ্জিনিয়ারিং (EEE)

Related Question

1
Find currents I and I₁ in the following circuit.

2
Determine the Thevenin's equivalent circuit at terminal X-Y of the following circuit.

3 State maximum power transfer theorem.

Maximum Power Transfer Theorem :

4
If the switch in the following circuit opens at t = 0, find v(t) for t≥ 0 and the initial energy stored in the capacitor.

5
Show that a series RL circuit is a low pass filter if the output is taken across the resistor. Calculate the cut-off frequency (f_c) if L = 2 mH and R = 10 kΩ.

6
Compute the average and effective values of the square voltage wave shown in the following figure.

Related Question

Promotion

Satt AI

Hi, আমি SATT AI!

Example 11.9 Sadiku: A series-connected load draws a current i(t) = 4 cos(100 πt + 10°) A when the applied voltage is v(t) = 120 cos(100πt - 20°) V. Find the apparent power and the power factor of the load. Determine the element values that form the series-connected load.

Question: Example 11.9 Sadiku: A series-connected load draws a current i(t) = 4 cos(100 πt + 10°) A when the applied voltage is v(t) = 120 cos(100πt - 20°) V. Find the apparent power and the power factor of the load. Determine the element values that form the series-connected load.

ইলেকট্রিক্যাল এন্ড ইলেকট্রনিক্স ইঞ্জিনিয়ারিং (EEE)

Related Question

1 Find currents I and I1 in the following circuit.

2 Determine the Thevenin's equivalent circuit at terminal X-Y of the following circuit.

3 State maximum power transfer theorem.

Maximum Power Transfer Theorem :

4 If the switch in the following circuit opens at t = 0, find v(t) for t≥ 0 and the initial energy stored in the capacitor.

5 Show that a series RL circuit is a low pass filter if the output is taken across the resistor. Calculate the cut-off frequency (fc) if L = 2 mH and R = 10 kΩ.

6 Compute the average and effective values of the square voltage wave shown in the following figure.

Related Question

Promotion

Satt AI

Hi, আমি SATT AI!

Question:
Example 11.9 Sadiku: A series-connected load draws a current i(t) = 4 cos(100 πt + 10°) A when the applied voltage is v(t) = 120 cos(100πt - 20°) V. Find the apparent power and the power factor of the load. Determine the element values that form the series-connected load.

1
Find currents I and I₁ in the following circuit.

2
Determine the Thevenin's equivalent circuit at terminal X-Y of the following circuit.

4
If the switch in the following circuit opens at t = 0, find v(t) for t≥ 0 and the initial energy stored in the capacitor.

5
Show that a series RL circuit is a low pass filter if the output is taken across the resistor. Calculate the cut-off frequency (f_c) if L = 2 mH and R = 10 kΩ.

6
Compute the average and effective values of the square voltage wave shown in the following figure.