A telecommunication system monitors 10 substations, each containing 5 signal channels. Each channel has a signal bandwidth of 100 Hz. The signals are quantized and encoded. The sampling rate is twice the Nyquist rate. The maximum quantization error is 0.25% of the peak amplitude mp. The required overall bit rate of the system.
Bandwidth per channel = 100 Hz
Sampling rate = 2 Nyquist = 2 2 100 = 400 samples/sec
Quantization error = 0.25% of mp ⇒
For uniform quantizer : = L = 400 levels
L = 2n
n = log2(400) ≈ 8.64
⇒ 9 bits/sample
Bit rate per channel = 400 9 = 3600 bps
Total channels = 10 substations 5 channels = 50
Total bit rate = 50 3600 = 180,000 bps = 180 kbp
Find currents I and I1 in the following circuit.
Determine the Thevenin's equivalent circuit at terminal X-Y of the following circuit.
If the switch in the following circuit opens at t = 0, find v(t) for t≥ 0 and the initial energy stored in the capacitor.
Show that a series RL circuit is a low pass filter if the output is taken across the resistor. Calculate the cut-off frequency (fc) if L = 2 mH and R = 10 kΩ.
Compute the average and effective values of the square voltage wave shown in the following figure.
১ ক্লিকে প্রশ্ন, শীট, সাজেশন ও
অনলাইন পরীক্ষা তৈরির সফটওয়্যার!
শুধু প্রশ্ন সিলেক্ট করুন — প্রশ্নপত্র অটোমেটিক তৈরি!
আপনি আমাকে যেকোনো প্রশ্ন করতে পারেন, যেমনঃ
Are you sure to start over?